SW1 L4-1.9L SOHC VIN 8 (1996)
I/P Retaining Bolt Caps
10. Install I/P upper trim panel outer cover fillers (SC1/SC2 only).
11. Reprogram PCM.
12. Verify operation. If diagnostic trouble codes (DTCs) are present, refer to the specific code chart.
IMPORTANT: Following PCM replacement, the SERVICE telltale will flash. This is a normal function of the PCM. When a service
replacement PCM is installed and properly programmed, the PCM will learn the crankshaft notches for misfire diagnosis. This procedure flashes
the SERVICE telltale. See: Description and Operation