SW1 L4-1.9L SOHC VIN 8 (1996)
3.
Disconnect electrical and purge line connections from EVAP canister purge solenoid. (Solenoid is located directly above the starter motor.)
4.
Remove EVAP canister purge solenoid retaining bolt and remove EVAP canister purge solenoid from vehicle.
5.
Remove rubber purge line from metal line at front of dash and discard.
6.
Install new EVAP canister purge solenoid (P/N 21006689) and retaining bolt.
Torque: 20 N.m (14 ft-lbs)
IMPORTANT
New purge line is 508 mm (20 in.).
