SW1 L4-1.9L SOHC VIN 8 (1996)
28.
Cut a 1.5 meter (5 ft.) section of 9 mm wiring harness conduit (P/N 21023494).
NOTICE:
To prevent damage to the replacement wire, fuel, oil and heat resistant conduit must be used. Wiring harness conduit (P/N 21023494) or equivalent
fuel, oil and heat resistant conduit must be used.
29.
Insert the remaining length of the replacement wire into the conduit.
30.
At the first engine wiring harness rosebud retainer, secure the conduit to the engine wiring harness with wiring harness straps (P/N 21020792).
31.
Using wiring harness straps (P/N 21020792), secure the new conduit to the engine wiring harness at enough locations to prevent the new conduit
from coming in contact with any moving parts.
32.
Route wiring harness conduit along exact path of the original engine wiring harness, up through access hole in front of the underhood junction
block (UHJB).
