SW1 L4-1.9L SOHC VIN 8 (1996)
45.
Install air cleaner assembly top, and front air intake duct assembly. Attach clips at air cleaner assembly and air cleaner clamp to front air intake
duct assembly.
46.
Close air cleaner clamp by striking the tab on the spring clamp with an object such as a screwdriver. The locking tab will disengage and the clamp
will spring into the closed position.
47.
Connect fresh air hose at cam cover.
48.
Connect negative battery cable.
49.
Turn ignition On and using Scan tool, monitor oxygen sensor voltage. Voltage should be approximately 450 millivolts.
50.
For 1995 vehicles, clear diagnostic trouble codes.