SW1 L4-1.9L SOHC VIN 8 (1996)
Seat Belt Control Module: Service and Repair
1.
Remove access panel above PRCM in center console.
2.
Remove four screws securing center console.
3.
Raise parking brake handle as far as possible.
4.
Raise center console from rear until access to PRCM is possible from rear of console.
5.
Gently press plastic tab at rear of PRCM and lift up at same time.
6.
Disconnect electrical connectors and remove from rear.
7.
Reverse procedure to install.
