SW1 L4-1.9L SOHC VIN 8 (1996)
Illustration Key
(1) Two Weld Nut Locations
(2) Anchor Bracket
(3) Spacer
(4) Bolt
(5) Trim
(6) Steel Panel Assembly
(7) Weld Nut
Wagon
Choose an anchor location shown in the figure that is most convenient for the customer.
Additional hardware is available if you require more than one child restraint.
1.
Raise rear liftgate.
2.
Remove rear sill molding.
3.
Remove cargo carpet and spare wheel cover.
NOTICE:
Improper installation of the top tether anchor may cause damage to wiring harness in the same area.
4.
Avoiding the wiring harness, position bracket in the forward direction and install tether screw/bolt provided in tether anchor package.
Torque: 20-30 N.m (15-22 ft-lbs)
