SW1 L4-1.9L SOHC VIN 8 (1996)
18.
With two screws provided in the kit, assemble display assembly clip to air bag Off display assembly.
^
On vehicles without a sunroof, the opening in the display assembly clip (1) faces toward the front (face) of the air bag Off display assembly.
^
On vehicles with a sunroof, the opening in the display assembly clip (2) faces the rear of the air bag Off display assembly.
19.
Apply appropriate applique' to air bag Off display assembly.
20.
If two air bag on-off switches are being installed, repeat steps 18 and 19 for the second air bag Off display assembly.
21.
On vehicles without a sunroof, attach the air bag Off display assembly to the headliner as shown in the illustration.
^
If only one air bag Off display assembly is used, center the air bag Off display assembly in the center of the headliner.
^
If two air bag Off display assemblies are used, make sure to place the driver air bag Off display assembly on the left (driver's) side of the
headliner. Center both air bag Off display assemblies in the center of the headliner.
IMPORTANT:
A driver air bag Off display light must be visible from the driver's seat. A passenger air bag Off display light must be visible from both the driver's