SW1 L4-1.9L SOHC VIN 8 (1996)
a.
Remove upper trim panel screw caps by carefully prying with a small flat head screwdriver.
b.
Remove upper trim panel screws.
IMPORTANT:
Be careful not to damage VIN plate when removing upper trim panel.
IMPORTANT:
Be careful, when removing upper trim panel, not to damage the upper trim panel seal.
c.
Lift upper trim panel at clip locations on rear edge to disengage clips.
d.
Disengage forward edge of upper trim panel by lifting upward at each outer corner, then pull rearward.
e.
Remove upper trim panel.