SW1 L4-1.9L SOHC VIN 8 (1996)
17.
If installing both air bag on-off switches:
^
Route the driver air bag on-off switch (1) wiring harness through the hole in the left side of the glove box, and secure the air bag on-off switch
to glove box with two pop rivets provided.
^
Route the passenger air bag on-off switch (2) wiring harness through the hole in the right side of the glove box, and secure the air bag on-off
switch to glove box with two pop rivets provided.
(1) Driver Air Bag On-Off Switch
(2) Passenger Air Bag On-Off Switch
CAUTION:
TO PREVENT PERSONAL INJURY AIR BAG DISPLAY LIGHTS MUST NOT BE PLACED ON ANY INSTRUMENT PANEL SURFACES
DIRECTLY IN FRONT OF THE DRIVER'S OR PASSENGER'S LEG OR KNEE AREA.
IMPORTANT:
There is one air bag Off display assembly for each air bag on-off switch installed in the vehicle.
