SW1 L4-1.9L SOHC VIN 8 (1996)
Alternator: Service and Repair
REMOVAL
CAUTION: MAKE SURE THE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED PRIOR TO LIFTING. TO HELP
AVOID PERSONAL INJURY WHEN A VEHICLE IS ON A HOIST PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE
OPPOSITE END FROM WHICH COMPONENTS ARE BEING REMOVED. MAKE SURE HOIST DOES NOT CONTACT FUEL OR BRAKE
LINES.
Generator
1. Disconnect battery negative cable.
2. Remove accessory belt.
3. Raise vehicle on hoist.
4. Remove right wheel.
5. Remove right side splash shield.
Generator
6. Remove the generator splash shield.
7. Disconnect the field wires.
NOTICE: If stud is not held and stud rotates, the plastic insulator will crack and/or break causing generator to fail.