SW1 L4-1.9L SOHC VIN 8 (1996)
Wheel Bearing: Service and Repair
Hub & Bearing Assembly
FRONT WHEEL BEARINGS AND/OR HUB
Fig. 3 Wheel Bearing/Hub Removal
Fig. 4 Hub Vise Installation
Fig. 5 Inner Bearing Race Removal
Fig. 6 Bearing Removal
1.
Remove steering knuckle and hub assembly as outlined under STEERING KNUCKLE & HUB ASSEMBLY.
2.
Remove splash shields, then ABS wheel speed sensor, is equipped.
3.
Install wheel bearing/hub removal tool No. SA9159S or equivalent, Fig. 3, then place assembly in suitable soft jawed vise, Fig. 4.