saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

A/T - Shift Solenoid Service Applications|Page 5863 > < A/T - Shift Solenoid Service Applications
Page 1
background image

Shift Solenoid: Technical Service Bulletins
A/T Control Solenoid Valve - Design Changes

BULLETIN NO.: 97-T-41A

ISSUE DATE: December, 1998

GROUP/SEQ. NO.: Transaxle-O8

CORPORATION NO.: 787108R

SUBJECT:
Service Information on Design Changes to Automatic Transaxle Control Solenoid Valve

Due to part interchangeability, this bulletin supercedes bulletin 97-T-41, which should be discarded.

MODELS AFFECTED:
1993-1998 and 1999 Saturn vehicles built up to and including VIN XZ154760 equipped with automatic transaxles (MP6/MP7)

Note

Vehicles built after the VIN break have control solenoid valves with an additional filter on the control side of the solenoid. They are currently being
used in all five solenoid locations and can be identified by a white top. The control solenoid valves were previously only used in the 2nd/Rev, 3rd,
and 4th gear clutch locations on 1997-1998 vehicles.

PURPOSE:
This bulletin provides technical information on changes to the automatic transaxle control solenoid valve.

Control solenoid valve, (P/N 21003289), can now be used as a service part back to the 1993 model year and can be used in all five solenoid locations on
the valvebody.

PARTS REQUIREMENTS:

21003289

Valve-Trans Cont Actr (93-99)

A/T - Shift Solenoid Service Applications|Page 5863 > < A/T - Shift Solenoid Service Applications