SW1 L4-1.9L SOHC VIN 8 (1996)
2.
Download the new service calibration. Refer to "PCM Flash Programming" under "General Description" in the "PCM Serial Data" section of the
"1996 Powertrain Controls Service Manual" or the "Service Stall Users Guide" for proper recalibration procedures. The Service Stall System
(SSS) and PDT must be at version 32.51 or greater.
IMPORTANT:
If SSS version 32.51 or greater is not available, call Saturn Customer Support Center at 1-800-7SATURN (1 800 772-8876), prompt 3.
3.
After the new service calibration has been downloaded into the PCM, diagnose any transaxle fluid pressure and/or TCC actuator DTCs that were
recorded previously. Refer to the "1996 Powertrain Controls Service Manual" for diagnosis.
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as shown.
