SW1 L4-1.9L SOHC VIN 8 (1996)
Differential Assembly: Technical Service Bulletins
Differential End Play Checking - Information Update
BULLETIN NO.: 97-T-19
ISSUE DATE: May, 1997
GROUP/SEQ. NO.: Transaxle-06
CORPORATION NO.: 787106
SUBJECT:
Service Manual Information Update on Differential End Play Checking Procedures
MODELS AFFECTED:
1991-1997 Saturns
PURPOSE:
When instructed to check differential end play, refer to the procedures in this bulletin. These procedures replace the procedures that are currently in the
Saturn Automatic and Manual Transaxle Service Manuals printed from 1991-1997.
IMPORTANT:
The differential end play checking procedures in this bulletin will be included in the 1998 Automatic and Manual Transaxle Service Manuals.
Differential End Play
IMPORTANT:
Procedures are the same for automatic and manual transaxies. Figures illustrate an automatic transaxle; manual transaxle is similar.
1.
Measure differential end play by using differential end play tool SA9112T. Select the largest gage tool that will fit between the case bearing pocket
and the outer differential race.
2.
Use the thickness (dimension) stamped on differential end play tool SA9112T and consult the Parts & Illustration Catalog to choose the correct
size selective snap ring.
