SW1 L4-1.9L SOHC VIN 8 (1996)
1. Slide regulator assembly into door and position regulator with attachment bolts.
Torque: 7.5 Nm (67 in.lbs.)
2. Install wiring to regulator (if equipped).
Raise regulator into position and install bolts.
3. Install wiring retaining clip to door inner structure.
4. Install window to regulator assembly.
Slide sash onto retaining clips
5. Install speaker assembly.
6. Install waterliner and trim panel.
7. Feed wiring for power lock switch through door handle assembly, then install door rods to handle assembly and mount handle to door.
8. Install wiring to door lock switch, then install switch into inside door handle.
