SW1 L4-1.9L SOHC VIN 8 (1996)
INSTALLATION
1.
Completely remove old urethane from liftgate.
2.
Clean the surface of liftgate glass opening with isopropyl alcohol and wipe dry with a clean lint-free cloth.
NOTICE:
Primer and urethane adhesive kit P/N 12346284 is the only recommended product for this procedure.
3.
Shake pinchweld primer (Black # 3) well before using. With a new dauber, apply primer (Black # 3) around entire perimeter of the liftgate glass
opening. Allow primer to dry 10 minutes.
4.
Install applique.
5.
Clean surface of glass where adhesive is to be applied with a clean alcohol-dampened cloth. Allow to air dry.
6.
Shake glass prep primer (Clear # 1) well before using. Apply glass prep primer (Clear # 1) around the entire perimeter of glass using dauber. Wipe
dry with a clean lint-free cloth.