SW1 L4-1.9L SOHC VIN 8 (1996)
12.
Install wiper arm to wiper motor shaft, positioning the wiper arm just below the first rear defroster grid at the bottom of the liftgate glass.
13.
Push retaining latch inward to secure wiper arm to wiper motor shaft.
14.
Connect electrical connectors to bus bar.
15.
Install center high mount stop lamp.
16.
Position liftgate inner lower panel to vehicle. Push at attaching clip locations to engage clip. Install fasteners.
17.
Install liftgate rubber bumpers.
18.
Position liftgate side window molding to vehicle. Push at attaching clip locations to engage clips.