SW1 L4-1.9L SOHC VIN 8 (1996)
1.
Clean debris from wiper motor shaft.
2.
Spread anti-seize compound (Saturn P/N 21485279 or equivalent) on base of wiper motor where it connects to arm.
3.
Install new wiper arm (PIN 21058229) to wiper motor shaft positioning the wiper arm just below the first rear defroster grid at the bottom of the
liftgate glass.
4.
Push retaining latch inward to secure wiper arm to wiper motor shaft.
5.
Remove protective tape from liftgate glass.
PARTS REQUIREMENTS:
21058229
Arm Asm - R / WDO WPR
21485279
Anti-Seize Compound
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as shown.