SW1 L4-1.9L SOHC VIN 8 (1996)
Wiper Motor: Service and Repair
Wiper Module And Motor Assembly
Removal
1. Remove wiper arm finish cap and wiper arm fastener. Lift wiper blade assembly away from windshield and remove wiper arm from pivot.
Fig. 5 Windshield Cowl Trim Panel Removal
2.
Remove fasteners at windshield edge of cowl trim panel. Open hood and remove remaining cowl trim panel fasteners, and remove cowl trim panel
after disconnecting washer hose.
3.
Disconnect windshield washer hose.
Important: Exercise care when removing instrument panel top cover to keep from scratching windshield garnish moldings.
4. Remove upper trim panel extensions by carefully lifting up at clip locations, starting at the rear above end cap.