SW1 L4-1.9L SOHC VIN 8 (1996)
5. Partially install wiper module assembly, connect wiring to wiper motor and to module frame.
6. Install wiper module assembly.
Torque: 10 Nm (89 in-lbs)
7. Turn wiper switch ON momentarily. Once wiper switch is turned Off, wiper mechanism should be in PARK position with wiper motor crank arm
in 9 o'clock position.
8. Connect washer hose to washer nozzle.
Fig. 5 Windshield Cowl Trim Panel Removal
9. Install cowl trim panel.
Note: Use new nuts. Torque retention of old nuts may not be sufficient.
10. Install wiper arms and fasteners.
Torque: 28 Nm (21 ft-lbs)