SW2 L4-1.9L DOHC VIN 7 (1997)
Brake Pedal Assy: Testing and Inspection
BRAKE PEDAL CHECK
1. With engine off and key off, pump service brake pedal until all reserve vacuum is exhausted from the brake booster. (A definite change in pedal
feel will occur.)
2. Install SA93O3NE (or equivalent) onto brake pedal.
3. Hook end of tape measure over top edge of brake pedal and measure the distance to the rim of the steering wheel.
4. Apply service brake pedal with 445 N (100 lbs.) force and re-measure. The difference between the "at rest" pedal position and the "applied" pedal
position is the actual pedal travel and should not exceed 57.0 mm (2.25 inches).