SW2 L4-1.9L DOHC VIN 7 (1997)
Oil Pan: Service and Repair
1. Remove the front exhaust pipe.
2. Remove the engine stiffening bracket and flywheel cover.
3. Remove the right-hand side tire, splash shield and vibration damper.
4. Loosen the four front motor mount bolts. Back out the bolts approximately 12 mm (1/2 inch).
5. Drain oil.
6. Remove all the oil pan bolts.
NOTE: An 8 mm flex socket can be used to access the rear oil pan bolt heads next to the flywheel on vehicles with manual transaxles.