SW2 L4-1.9L DOHC VIN 7 (1997)
Control Assembly: Service and Repair
A/C-Recirc Switch and Bulbs
A/C-RECIRC SWITCH REMOVAL
1. Carefully remove A/C-Recirc switch package by lifting at outer edge with a small screwdriver.
2. Disconnect electrical connector.
A/C-RECIRC SWITCH INSTALLATION
1. Connect electrical connector.
2. install A/C-Recirc switch package through opening and push straight in.
BULB REMOVAL
1. Remove A/C-Recirc switch package by lifting at outer edge with a small screwdriver.
2. Turn bulb socket counterclockwise and remove.
BULB INSTALLATION
1. Insert bulb into opening and turn clockwise to lock.
2. Install A/C-Recirc switch package through opening and push straight in.
