SW2 L4-1.9L DOHC VIN 7 (1997)
Housing Assembly HVAC: Service and Repair
Removal
HVAC MODULE REMOVAL
1. Disable the Supplemental Inflatable Restraint (SIR) system. Refer to Disabling the SIR System in Service Precautions.
2. Record pre-set radio stations.
3. Disconnect negative battery cable.
4. Recover refrigerant using an approved refrigerant recovery system.
5. Remove air cleaner housing cover and air induction hose at intake manifold.
6. Remove suction hose and liquid line from thermal expansion valve.
7. Remove Thermal Expansion Valve (TXV) from evaporator.
CAUTION: Place protective covers over A/C hoses, lines, TXV, and HVAC module to prevent contamination of A/C system.
8. Remove coolant reservoir cap.