SW2 L4-1.9L DOHC VIN 7 (1997)
8. Lower vehicle.
9. Remove three engine mount to front cover nuts and two engine mount to midrail bracket nuts. Allow the powertrain to rest on the block of wood.
Remove mount.
10. Raise vehicle.
11. Remove four bracket to midrail bolts from engine side of bracket and three bracket to midrail bolts from wheelhouse side of bracket. Remove
bracket.
12. Open fuel vapor line clamps holding heater return line.
13. Remove fuel vapor line clip from stud.
14. Lower vehicle.
15. Remove remaining clamp and clip from midrail.
16. Remove washer bottle bolt and move washer bottle aside.