SW2 L4-1.9L DOHC VIN 7 (1997)
5. Install hose to heater core outlet. Position clamp at 6 o'clock.
6. Lower vehicle.
7. Position pipe in mid-rail clamp and close.
8. Install hoses and clamps to bottle and pipe position clamps at 3 o'clock.
9. Install washer bottle and bolt.
10. Install midrail bracket.
11. Raise vehicle.
12. Hand start all midrail bracket bolts.
13. Tighten and torque all bolts. Torque to 30 Nm (22 ft. lbs.).
14. Lower vehicle.
CAUTION: To prevent engine front cover and mount damage, the three engine mount to engine front cover nuts must be tightened down
uniformly.
