SW2 L4-1.9L DOHC VIN 7 (1997)
If the Controller/PCM part number matches one of the numbers listed, proceed to the diagnostics outlined in this bulletin.
If the Controller/PCM part number does not match one of the numbers listed, then after completing the diagnostics outlined in this bulletin, reprogram
the PCM.
Reprogram the PCM according to the "Controller/PCM Part Number (End Model)" table listed below. (Refer to "EEPROM Reprogramming" in the
"Service Stall System User Guide.")
IMPORTANT:
Version 41.0 or greater service stall system (SSS) software is required for this flash process. Verify the SSS is version 41.0 or greater. If SSS version
41.0 or greater is not available, call Saturn Customer Support Center at 1-800-7SATURN (1-800-772-8876), prompt 3. In Canada, call
1-800-828-6860 for English, or 1-800-503-3222 for French.
IMPORTANT:
It will be necessary to perform the crankshaft learning procedure. (Refer to Technical Information Bulletin 96-T-39, and perform the Crankshaft
Learning Procedure contained in the bulletin.)
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as shown
Case Type
Description
Labor Operation
Time
VW
Install Service PC0M
Code
0.3 hrs
Calibration
T9772
EGR - Insufficient Flow Detected