SW2 L4-1.9L DOHC VIN 7 (1997)
7. Connect cigarette lighter electrical connector.
8. Install cigarette lighter bulb through opening and rotate clockwise.
9. Move console forward into position.
IMPORTANT: Make sure upper tabs on front of console engage sheet metal on lower I/P brace.
10. Install and tighten front console screws.
Torque: 1.2 N.m (11 in.lbs.)
11. Align rear of console with pin on mounting pad.
12. If equipped with center console/arm rest, position center console/arm rest to center console.
13. Install and tighten screws.
