SW2 L4-1.9L DOHC VIN 7 (1997)
Knee Diverter: Service and Repair
The knee bolsters are used to absorb energy and control the forward movement of the driver and passenger during a frontal crash by limiting leg
movement.
IMPORTANT: In the event deployment has occurred, refer to "Repairs and Inspections Required After an Accident."
IMPORTANT: The knee bolster should be replaced, not repaired, if there is any visible damage.
REMOVAL
1. Remove screws from data link connector and steering column filler panel.
2. Disconnect cable from filler panel. Pull hood release handle forward. Feed cable under hood release handle and slide pin out. Remove steering
column filler panel.
3. Remove steering column filler panel.
INSTALLATION
1. Pull hood release handle forward. Feed cable under hood release handle and slide pin in. Connect cable to filler panel.
2. Install steering column filler panel, data link connector and screws.