SW2 L4-1.9L DOHC VIN 7 (1997)
12. Remove steering gear-to-cradle fasteners and remove steering gear from vehicle through left fender well.
Installation
1. Place steering gear in vehicle.
2. Install steering gear-to-cradle bolts and new nuts.
-
Torque: 50 Nm (37 ft. lbs.)
3. Install intermediate shaft onto the steering gear and torque pinch bolt.
-
Torque: 47 Nm (35 ft. lbs.)
IMPORTANT: Use Loctite(r) 242 Threadlocker (or equivalent) on thread of pinch bolt.