SW2 L4-1.9L DOHC VIN 7 (1997)
1. Place knuckle in strut and install fasteners.
IMPORTANT: Do not torque fasteners at this time.
2. Install lateral link onto knuckle with fastener.
IMPORTANT: Do not torque fastener at this time.
3. Place trailing arm (with bushings) into knuckle and install nut.
IMPORTANT: Do not torque fastener at this time.
4. Install trailing arm into body and secure with fasteners.
-
Torque: 120 Nm (89 ft. lbs.)
5. Torque trailing arm-to-knuckle fastener nut.
-
Torque: 100 Nm(74 Bulbs.)
6. Torque lateral link-to-knuckle fastener.
