saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Wiring Harness > < Electrical - Information For Electrical Ground Repair|Page 7701
Page 1
background image

Multiple Junction Connector: Technical Service Bulletins
Engine Controls - ECM Connector Diagram Update

File in Section: 08 - Body and Accessories 

Bulletin No.: 03-08-45-002

Issue Date: August, 2003

Subject: 
Revised 2.2L (L61) Engine Control Module J1 & J2 Connector Face Diagram

Models Affected: 
2002-2003 Saturn VUE vehicles with 2.2L Engine (VIN D - RPO L61)

Attention:

General Manager, Fixed Operations Manager, Technician

Purpose:

The purpose of this bulletin is to update the Engine Control Module Connector Face view for both the J1 and J2 connector in the 2002-2003 Revised
Saturn VUE Body Electrical Diagnostics Service Manual.

The illustrations on pages 602 and 606 in the Harness Connector Faces section in the 2002-2003 Revised Saturn VUE Body Electrical Diagnostics
Service Manual shows incorrect pin reference locations. The cavity and circuit numbers on the associated tables in the Service Manual are correct. Only
the illustrations are incorrect.

The illustrations show the correct pin reference locations for both the J1 and J2 L61 ECM connectors. Make copies of the illustrations and cut out each
one and tape over current illustrations in the Service Manual. The eSI website will be updated immediately and future Service Stall System SI CD
releases will include this and other Service Manual updates.

Disclaimer

Wiring Harness > < Electrical - Information For Electrical Ground Repair|Page 7701