VUE L4-2.2L VIN D (2002)
6.
Install the outlet resonator/duct assembly.
1.
Connect the PCV fresh air bent hose at the cam cover.
2.
Tighten the clamp at the throttle body assembly.
3.
Install the push-push attachment from the outlet resonator/duct assembly to support bracket.
4.
Tighten the clamp at the air cleaner assembly.
5.
Connect the intake air temperature (IAT) sensor connector.
7.
Connect the negative battery cable.
8.
CALIFORNIA, MASSACHUSETTS, MAINE, & VERMONT VEHICLES ONLY: Install a Recall Identification Label. Also for California
vehicles complete a "Proof of Correction" certificate upon recall completion.
Recall Identification Label - California/Massachusetts/Maine/Vermont Vehicles Only
Place a Recall Identification Label on each vehicle corrected in accordance with the instructions outlined in this Product Recall Bulletin. Each
label provides a space to include the recall number and the five-digit dealer code of the dealer performing the recall service. This information may
be inserted with a typewriter or a ballpoint pen.
Put the Recall Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the
vehicle.
When installing the Recall Identification Label be sure to pull the tab to allow adhesion of the clear protective covering. Additional Recall
Identification Labels for US dealers can be obtained from Dealer Support Materials by ordering on the web from DWD Store
www.gmdealerworld.com and then click on the DWD Store link. Request Item Number S-1015 when ordering.
Customer Reimbursement - For Canada
Customer requests for reimbursement of previously paid repairs to correct the Ignition Control Module are to be submitted to the retailer prior to
or by March 31, 2009.
All reasonable customer paid receipts should be considered for reimbursement. The amount to be reimbursed will be limited to the amount the
repair would have cost if completed by an authorized Saturn retailer.
When a customer requests reimbursement they must provide the following:
^
Proof of ownership at time of repair.
^
Original paid receipt confirming the amount of repair expense(s) that were not reimbursed a description of the repair and the person or entity
performing the repair.
Claims for customer reimbursement on previously paid repairs are to be submitted as required by WINS.
Important:
