VUE 2WD V6-3.5L VIN 4 (2004)
Transmission Cooler: Service and Repair
Oil Cooler Line Replacement
Removal Procedure
1. Place a drain pan or suitable container under the vehicle.
2. Clean the cooler line connection points at the radiator and transmission.
3. Disconnect the upper transmission oil cooler (TOC) line from the radiator.
4. Raise and support the vehicle.
5. Disconnect the lower TOC line from the radiator.
6. Disconnect the upper TOC line from the clip on the fan shroud.
7. Remove the TOC line bracket bolt from the transmission bracket.
8. Slide the TOC line dust covers away from the quick connect fittings.
9. Using a small flat-bladed tool, carefully remove the "E" clip retainers from the quick connect fittings.
10. Remove the TOC lines from the transmission.
11. Remove the TOC lines from the vehicle.
12. Remove the TOC line dust covers from the TOC lines.
13. Remove the TOC line seal from the transmission.
Installation Procedure