VUE AWD L4-2.2L VIN D (2005)
1. Install the inner belt seal by pushing the seal onto the trim panel flange, starting from the front.
2. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Early Production) (See: Front Door Panel/Service and
Repair/Panel Replacement/Trim Panel Replacement - Side Front Door (Early Production))Trim Panel Replacement - Side Front Door (Late
Production) (See: Front Door Panel/Service and Repair/Panel Replacement/Trim Panel Replacement - Side Front Door (Late Production)) .
Front Side Door Window Belt Outer Sealing Strip Replacement
Sealing Strip Replacement - Front Door Window Belt Outer
Removal Procedure
1. Remove the belt seal retaining screw at the rear edge of the door.
2. Remove the outside rearview mirror. Refer to Mirror Replacement See: Mirrors/Service and Repair
3. Remove the outer belt seal by lifting up on the seal starting at the rear and working forward.
Installation Procedure
1. Align the outer belt seal fastener location with the hole in the door structure and outer panel retaining tabs.
2. Starting at the rear of the belt seal, push the belt seal down onto the flange until fully seated.
3. Install the outside rearview mirror. Refer to Mirror Replacement See: Mirrors/Service and Repair
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the outer belt seal retaining screw.
Tighten the screw to 2 N.m (18 lb in).
