VUE AWD L4-2.2L VIN D (2005)
5. Remove the fastener cover from the center pillar garnish molding by inserting a small flat-bladed tool in the gap at the forward vertical side of the
cover.
6. Remove the center pin of the garnish molding fastener by using needle-nose pliers.
7. Starting at the top, gently pull on the garnish molding to disengage the attaching clips.
8. Remove the garnish molding by sliding the molding up and disengaging the inside clips from the lower garnish molding.
Installation Procedure
1. Position the center pillar garnish molding over the lower garnish molding with the bottom tabs behind the lower molding.
2. Gently push at the clip locations to install the garnish molding.
3. Insert the weather-stripping over the trim edge.
