saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Procedures|Page 11529 > < Procedures|Page 11527
Page 4
background image

2. Push downward to install the head restraint.
3. Pull up on the restraint to ensure that the restraints are locked in place.

Head Restraint Retainer Replacement - Rear Seat

 
HEAD RESTRAINT RETAINER REPLACEMENT - REAR SEAT

REMOVAL PROCEDURE

1. Remove the headrest.
2. Disconnect the lower J-hook retainer from the seat back trim cover.

3. Carefully pull up the trim cover, disengaging the hoop and loop retainers, until the headrest guides are exposed.
4. Squeeze the locking tabs on the headrest guide and pull the guides up and out of the seat back pad.

INSTALLATION PROCEDURE

1. Install the seat back trim cover over the top of the seat back.

Procedures|Page 11529 > < Procedures|Page 11527