VUE AWD L4-2.2L VIN D (2005)
8. For vehicles with heated seats connect the heat module electrical connector.
9. If the seat is equipped with a lumbar support, perform the following procedure:
1. Pull the lumbar cable sleeve forward.
2. Using a sharp-bladed tool, make a small slit where the lumbar actuator meets the cover.
3. Install the lumbar knob by pushing firmly.
4. Adjust the lumbar knob to ensure that the lumbar is operating correctly.
10. Install the front seat into the vehicle. Refer to Seat Replacement - Front Bucket (See: Service and Repair/Seat Replacement - Front Bucket) .