VUE AWD L4-2.2L VIN D (2005)
Camshaft: Service and Repair
Exhaust Camshaft and Lifter Replacement
Exhaust Camshaft and Lifter Replacement
^
Tools Required
-
J 43655 Camshaft Support Holding
-
SA9127E Gage Bar Set
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Disconnect the Intake Air Temperature (IAT) sensor connector.
3. Loosen the clamp at the air cleaner assembly.
4. Remove the push pin attachment from the outlet resonator/duct assembly to support bracket.
5. Loosen the clamp at the throttle body assembly.
6. Disconnect the PCV fresh air vent hose at the cam cover.
7. Remove the outlet resonator/duct assembly.
8. Disconnect the electrical connector at the ignition module.
9. Remove the ignition module assembly with bolts.
10. Disconnect the coolant de-gas hose clip on the fuel rail.