VUE AWD L4-2.2L VIN D (2005)
26. Position the outlet resonator/duct assembly into position.
27. Connect the PVC fresh air vent hose assembly.
28. Tighten the clamp at the throttle body assembly.
29. Position the outlet resonator/duct assembly up with the support bracket and install the push-pin.
30. Tighten the clamp at the air cleaner assembly.
31. Connect the Intake Air Temperature (IAT) sensor connector.
32. Connect the negative battery cable.
^
Tighten the battery terminal bolt to 17 Nm (13 ft. lbs.).
