VUE AWD L4-2.2L VIN D (2005)
10. Install the oil level indicator tube into the block.
11. Install the oil level indicator tube bolt.
^
Tighten the oil level indicator tube bolt -L61 to 10 Nm (89 inch lbs.).
12. Remove the oil fill cap.
13. Fill the engine with 4.73 L (5 qt) of new 5W-30 engine oil.
14. Install the oil fill cap.
Important: The oil level should be checked on a level surface.
15. Start the engine and inspect for leaks.
16. Check the engine oil level after the engine is OFF for 5 minutes. This will allow the engine oil to drain down into the oil pan from the cylinder
head.
17. Verify the oil level and inspect for leaks.