VUE AWD L4-2.2L VIN D (2005)
^
Tighten the timing chain oil nozzle bolt to 10 Nm (89 inch lbs.).
2. Install the timing chain drive sprocket to the crankshaft.
Notice: Set crankshaft to 60° before top-dead center or after TDC to prevent valve to piston contact.
3. Using the dampener, rotate the crank so that the mark on the timing chain drive sprocket is at 5 o'clock position.
4. Set the crankshaft to 60° before the top dead center.
5. Position the exhaust camshaft with the offset slot to 2 o'clock position.
6. Position intake camshaft with offset slot to 11 o'clock position.
7. Assemble the chain to the intake camshaft sprocket aligning the upper link to the INT diamond timing mark on the camshaft sprocket.
