VUE AWD L4-2.2L VIN D (2005)
16. Verify that all the colored links are aligned with the appropriate intake (1), crankshaft sprocket (2), and (3) exhaust marks.
17. Verify the crankshaft sprocket timing mark is at 5 o'clock.
18. If marks are not correct, you must repeat the timing procedure.
19. Install the fixed timing chain guide and bolts.
^
Tighten the timing chain fixed bolts to 10 Nm (89 inch lbs.).
20. Apply the thread sealant Permatex Thread Pipe Sealant or equivalent compound to the thread. Install fixed guide bolt access hole plug.
^
Tighten the timing chain bolt access hole plug to 40 Nm (30 ft. lbs.).