VUE AWD L4-2.2L VIN D (2005)
Exhaust Manifold: Service and Repair
Exhaust Manifold Replacement
Exhaust Manifold Replacement
^
Tools Required
-
J 39194-C 02 Sensor Remover Tool
Removal Procedure
1. Disconnect the Intake Air Temperature (IAT) sensor connector.
2. Loosen the clap at the air cleaner assembly.
3. Remove the push-pin attachment from the outlet resonator/duct assembly to support the bracket.
4. Loosen the clamp at the throttle body assembly.
5. Disconnect the PCV fresh air vent hose at the cam cover.
6. Remove the outlet resonator/duct assembly.
7. Remove the exhaust manifold heat shield bolts.
8. Remove the exhaust manifold heat shield.
9. Disconnect the front and rear 02 sensor connectors. Remove the sensor if the exhaust manifold is being replaced using J 39194-C.
10. Raise the vehicle.
