VUE AWD L4-2.2L VIN D (2005)
Blower Motor Switch: Service and Repair
BLOWER MOTOR SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the center trim bezel.
2. Remove the blower motor control knob by pulling rearward off shaft.
3. Press the blower motor switch retention prongs and remove the switch from the HVAC control module.
INSTALLATION PROCEDURE
1. Install the blower motor switch to the HVAC control module. Press to engage the retention prongs.
2. Install the center trim bezel.
3. Install the blower motor control knob.