VUE AWD L4-2.2L VIN D (2005)
1. Add the specified amount of PAG oil to the condenser. Refer to Refrigerant System Capacities.
2. Inspect the radiator to condenser seals for the proper position.
3. Install the condenser by guiding the tabs into the retention clips on the radiator. Press down to engage the retention clips.
4. Install the CRFM brackets to the vehicle.
5. Install the CRFM bracket bolts to the radiator support.
Tighten the bolts to 10 N.m (89 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.