VUE AWD L4-2.2L VIN D (2005)
Marker Lamp Bulb: Service and Repair
Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement
TAIL LAMP ASSEMBLY AND /OR BACKUP, SIDEMARKER, STOP, TURN SIGNAL BULB REPLACEMENT
REMOVAL PROCEDURE
1. Remove the tail lamp housing to body screws.
2. Carefully slide the tail lamp housing rearward away from vehicle.
3. Disconnect the tail lamp housing electrical connector.
4. Remove the tail lamp housing from the vehicle.
5. Rotate the tail lamp bulb assembly counterclockwise and remove from the housing.
6. Pull tail lamp bulb out of the bulb socket.
INSTALLATION PROCEDURE
