VUE AWD L4-2.2L VIN D (2005)
Turn Signal Bulb: Service and Repair
Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb
Replacement
HEADLAMP ASSEMBLY OR HEADLAMP BULB AND/OR CORNERING, SIDEMARKER, PARK, TURN SIGNAL BULB
REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
1. Open the hood.
2. Remove the side marker lamp.
3. Remove the headlamp bracket to structure bolts.
4. Insert a blat-bladed tool through the opening in the upper structure.
IMPORTANT: Make sure the screwdriver tip fits through the opening in the headlamp bracket lower arm.
5. Gently push the locking tab toward the rear of the vehicle with flat-bladed tool to detach the headlamp bracket lower arm.
6. Lift headlamp assembly upward.
7. Disconnect the electrical connector from the headlamp assembly.
8. Remove the headlamp assembly away from the vehicle, if necessary.
