VUE AWD L4-2.2L VIN D (2005)
1. Inspect the foam seal. If the seal is damaged, replace the seal using Kent Industries adhesive back foam tape P/N 46485 or equivalent.
2. Install the filter housing to the body.
3. Install the new seal nuts to the filter housing.
Tighten the nuts to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: New seal nuts must be used when installing passenger compartment air filter housing to prevent leaks.
4. Connect the washer nozzle hose to the washer nozzle.
5. Install the air filter access panel.
6. Install the push pins to the air filter access panel.
