VUE AWD L4-2.2L VIN D (2005)
6. Remove the engine oil drain plug and drain the oil into an approved container.
7. Inspect the engine oil drain plug. Replace the drain plug if the sealing surface is worn or damaged.
8. Remove the engine oil drain plug and drain the oil into an approved container.
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the engine oil drain plug.
^
Tighten the oil pan drain plug -L61 to 25 Nm (18 ft. lbs.).
10. Lower the vehicle.
Notice: The oil filter must snap into the oil filter cap. If a snap does not occur, verify the correct oil filter element is being installed or engine damage
may occur.
11. Snap a new oil filter element into the oil filter cap.
12. Install the oil filter cap with the element into the casting in the block and tighten.
^
Tighten the oil filter cap to 25 Nm (18 ft. lbs.).
